Shame the controller that comes supplied isn't of any use though!
Not sure about the quality of the stepper drivers but I've got a Gecko G540 in case it's needed.
Needless to say there's no documentation to speak off :mad: If you want any info that doesn'y involve me starting it, let me know. after reading about other people with the 6040, and the 3040 (basically the same, but smaller), the other users have had problems with the control-box, and the VFD's manual, so I decided to ask the seller if he would sell the machine without the control-box and VFD, And he did.
_nkw=cnc&_sacat=0&_sop=12&_dmd=1&_odkw=&_osacat=0&_trksid=p3911.c0.m270.l1313), I contacted them on ebay, but the buying itself was outside ebay, and the payment was done on paypal.
Arrived in Norway in less than a week, shipped by DHL. They really are good value, you'll probably find the table will be very slightly out over some of it, but no big deal to shim or adjust that.